GermanCorrea
Member
I want help how program RSLogix5000 to communicate with 2408f and 2404f series Temperature Controllers using profibus
2408f and 2404f series Temperature Controllers and RSLogix5000
- Thread starter GermanCorrea
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
Profibus is not the most common network for use with ControlLogix, and Eurotherm temperature controllers are not the most common slave devices.
It is possible but unlikely that a Forum member will have an exact example for you, but we may have experience with Profibus and ControlLogix generally (I do), or Eurotherm temperature controllers specifically.
Which Profibus interface module are you using for the ControlLogix ?
Have you obtained and loaded the *.GSD files for the Eurotherm controllers ?
Are you having specific problems with an installation or program, or are you looking for advice prior to starting ?
It is possible but unlikely that a Forum member will have an exact example for you, but we may have experience with Profibus and ControlLogix generally (I do), or Eurotherm temperature controllers specifically.
Which Profibus interface module are you using for the ControlLogix ?
Have you obtained and loaded the *.GSD files for the Eurotherm controllers ?
Are you having specific problems with an installation or program, or are you looking for advice prior to starting ?
GermanCorrea
Member
OP
Similar Topics
HelloI need software to download the program from PLC EH-A28DRP from an old machine whose manufacturer does not exist. It may be Ladder Editor for...
I'm at a loss here and hoping someone else has seen this:
Background:
We've got two identical machines on our floor (we'll call them machine A &...
how to communicate FactoryTalk Optix and Mitsubishi Q Series. I want to know the details of that
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
