monsam
Member
Hi All
I am busy setting up a CompactLogix L30 controller with a Delta BOP-B series HMI via Modbus RTU. I am using the MODBUS-MAster app which i downloaded from Rockwell site. Also, i am going via RS232 since it is a 1 to 1 connection for the HMI.Problem i have with the Delta Screeneditor 2.0 software is that i cant seem to find how to animate a bridge up-down movement based on my angle position. The PLC is existing and the Delta HMI is being added. Could someone point me in the right direction please.
THANK YOU
I am busy setting up a CompactLogix L30 controller with a Delta BOP-B series HMI via Modbus RTU. I am using the MODBUS-MAster app which i downloaded from Rockwell site. Also, i am going via RS232 since it is a 1 to 1 connection for the HMI.Problem i have with the Delta Screeneditor 2.0 software is that i cant seem to find how to animate a bridge up-down movement based on my angle position. The PLC is existing and the Delta HMI is being added. Could someone point me in the right direction please.
THANK YOU
Last edited:
