communication cards RIO REMOTE I / O 1336-GM1

antihard

Member
A
Join Date
Jul 2009
Location
casablanca
Posts
4
Hello
I have two communication cards RIO REMOTE I / O 1336-GM1 for Drive i1336 plus II of allen bradley my problem is when I change the drive i1336 by i1336 plus II my plc slc 500 can't communiucate with the new drive but if i change the new communication card 1336-GM1(for i1336 plus 2) by old card it's work.are that someone has an idea about the problem
Thanks
 

Similar Topics

S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
20
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
76
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
99
mk42
M
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
145
mk42
M
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
66
Hazatov
H
Back
Top Bottom