communication cards RIO REMOTE I / O 1336-GM1

antihard

Member
A
Join Date
Jul 2009
Location
casablanca
Posts
4
Hello
I have two communication cards RIO REMOTE I / O 1336-GM1 for Drive i1336 plus II of allen bradley my problem is when I change the drive i1336 by i1336 plus II my plc slc 500 can't communiucate with the new drive but if i change the new communication card 1336-GM1(for i1336 plus 2) by old card it's work.are that someone has an idea about the problem
Thanks
 

Similar Topics

C
SLC 5/03 Communication / Processor Issue
Hello All! I am writing today because I cannot figure this out for the life of me. Another site I am affiliated with keeps having their slc 5/03s...
2
Replies
16
Views
309
OkiePC
OkiePC
A
Communication Issues between PowerFlex 700 and M580 Controller
Hello, I am currently in the final week of my internship and I have encountered issues with communication between a PowerFlex 700 variable...
Replies
8
Views
154
Lare
L
dalporto
ProSoft MVI56E-MNETC Client Communication monitoring
Hi all. I have a Modbus ProSoft module in my setup with a capability of 30 clients (0-29), which I'm trying to monitor the Ethernet Connection...
Replies
0
Views
43
dalporto
dalporto
F
Modbus TCP communication
Hi folks, I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Replies
10
Views
339
Contr_Conn
Contr_Conn
T
TIA Portal 15.1. and fanuc SR-6iA Communication
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
Replies
0
Views
50
Tinx12
T
Back
Top Bottom