long tag in citect

majid123

Member
M
Join Date
Aug 2010
Location
isfahan
Posts
1
I have a problem with long variable tags in citect7.10 I'm using M340 PLC and MBSLAVE driver .
When i use duoble word in PLC and send to Citect the value limits to BCD and for negative values gets #COM error?
but this event is not happened when use MODNET driver!
 

Similar Topics

M
Panelview 1000e, rio tag for long interger.
Panelview 1000e, rio tag for long interger. Need to have a f file in the plc 5 read the same on the panelview screen. Did a copy f8;1 to n7:100...
Replies
0
Views
2,228
mykeeplace
M
J
I'm looking for a long term buyer for automation control equipment. Located in Alberta. Willing to ship if it's paid for.
I have Allen Bradley plcs, I have had Circuit breakers and other automation equipment in the past. There's no solid buyers local. How much do you...
Replies
2
Views
203
James Mcquade
J
D
Long-winded question about 5580 and EN2T
I have a question. I work in a very large plant and this one (of many hundreds of control cabinets) contains one 5580 (1756-L83E), two 1756-L73...
Replies
6
Views
203
danno4200
D
P
1734-rs232 ascii reading too long barcode messages
Hi to everybody. I need to read the first 12 characters of the message that a barcode reader sends to the ascii card (1734-rs232 ascii) and I...
Replies
8
Views
725
drbitboy
drbitboy
ceilingwalker
OMS Group Impact 100 Metering Machine long shot
Hello all. This is a very lonnnnnnng shot but worth a try. I have an OMS Group Impact100 metering machine. At this customer it blows foam into 3d...
Replies
0
Views
186
ceilingwalker
ceilingwalker
Back
Top Bottom