i am new to ace3600 and maple systems Oit4185 i've been trying to establish communication using Modbus protocol (via RS-232) and i always get an error from the OIT4185 "can't connect to PLC, retry in Progress" and on the ace3600 i get error #827 "first y-coordinate out of range" and also error #825 "Data type Mismatch". I am thinking that i have an addressing problem. I tried everything i can think of but no success. Please help!!
communication between motorola ace3600 and maple systems OIT4185
- Thread starter afialey
- Start date
Similar Topics
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Or there is an alternative to this? I suppose there are many but I've only seen put/get
Can you for example set up a new plc and connect it to an...
