real time clock Fx2n

avec21 · Sep 3, 2010

I finally figured out how to get the real time clock data from the PLC and display it in citect, but the problem is that the PLC has a wrong time , date and year.
How can i write the correct ones to the PLC?

Thanks

Badger · Sep 3, 2010

On the task menu at the top of the page click online and then select SET TIME its the last one on the list Regards Badger.. You will need to be connected to the plc of course.

avec21 · Sep 3, 2010

Badger said:
On the task menu at the top of the page click online and then select SET TIME its the last one on the list Regards Badger.. You will need to be connected to the plc of course.

Thanks for your fast reaction.
I can't find the set time button, Do i have to search in citect or GX IEC developer?

Badger · Sep 3, 2010

avec21 said:
Thanks for your fast reaction.
I can't find the set time button, Do i have to search in citect or GX IEC developer?

GX Developer- open up the project and follow as instructed Regars Badger

Badger · Sep 3, 2010

Sorry Avec i thought you were using GX Dev' If you are using IEC dev' it may be somewhere else I'll take a look for you.

avec21 · Sep 3, 2010

Badger said:
GX Developer- open up the project and follow as instructed Regars Badger

Iam using GX IEC Developer 6.10

Badger · Sep 3, 2010

Hello again Avec. I cannot find time settings in IEC at all, however when i open an IEC project there is a clock in the status bar at the bottom of the page (if yours deos not have a clock then double click the bar and add clock) This clock is constantly updating from the laptop that is runnung the software you may try to connect to the PLC go online this may update the PLC clock automatically. Best of luck Badger.

real time clock Fx2n

avec21

Member

Badger

Member

avec21

Member

Badger

Member

Badger

Member

avec21

Member

Badger

Member

Similar Topics