PLC 5/20 and 5/40

jcp

Member
J
Join Date
Feb 2010
Location
Multan
Posts
369
Hi fellows;
Hope all are well. I have a control of gas turbine which used the AB 5/20 and 5/40. The communicaton esstablished with AB6200 dos version. I search all over the net but i am fail to dowbload this for learning purpose. Some body suggest me that you can alos used RSLOGIX 5 for that. But still again fail to download the demo version.
I just want to download that for learning purpose is their any link where i download it or any sugession which software i used for learning that PLC's. I have already work on RSLOGIX 5000 version 13 and 16.
Please guide me i will appriciate.
Thanking you
 
jcp said:
Hi fellows;
Hope all are well. I have a control of gas turbine which used the AB 5/20 and 5/40. The communicaton esstablished with AB6200 dos version. I search all over the net but i am fail to dowbload this for learning purpose. Some body suggest me that you can alos used RSLOGIX 5 for that. But still again fail to download the demo version.
I just want to download that for learning purpose is their any link where i download it or any sugession which software i used for learning that PLC's. I have already work on RSLOGIX 5000 version 13 and 16.
Please guide me i will appriciate.
Thanking you
Click to expand...

I may be corrected, but I don't think AB/Rockwell had Demo Software for the RSLogix line. The 6200 Software is very old and deprecated. So, you should look at upgrading to RSLogix5.

There are some free versions of RSLogix for the Pico and Micro lines that are similar, but do not program the PLC5. It would give you a feel for the RSLogix User Interface.

Stu....
 
jcp said:
Dear sir;
Can i open my project in that for learnning purpose.
regards
bye
Click to expand...

You will need RSLogix5 to open your existing 6200 Project. I would contact your local AB Supplier to see what they can do for you.

Stu.....
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
160
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
184
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
38
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
247
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
Back
Top Bottom