Pulse Using Time Interupt

JayD

Member
J
Join Date
Aug 2009
Location
Australia
Posts
53
Hi All,

I am using a S7 PLC and am wanting to generate a pulse every 10ms to be used in my main program (OB1). What is the easiest way to do this? I was thinking I should use a Time Interupt (OB35).

Cheers
JD
 

Similar Topics

R
HSC - any advantage using A/B pulse?
Hi! I use a s7-1200 with a HSC single phase on input i0.0 100kHz, and input filter set to lowest 0,1uS. It is around 1300pulses on each step we...
Replies
7
Views
1,764
rQx
R
W
Pausing pulse count on high speed counter ?
Hello, To make it short, the current system setup is a compact logic with a high speed counter 1769-HSC input module reading pulses from a flow...
Replies
12
Views
1,994
rdrast
rdrast
M
500 msec Pulse using multiple Controll Logix PLC
Good afternoon to all. I am new here and seeking your vast knowledge. I have been tasked with pulsing the alarm light in multiple machines with...
Replies
14
Views
5,345
Bolatov
B
M
Pulse Generation using Fatek FBS-20 MCT PLC
Hello I want to generate a continous Pulse Train Output at a certain frequency using Y0 output of Fatek FBS-20 MCT PLC for a Stepper Motor...
Replies
1
Views
1,899
Geoff White
G
L
Using Micrologix1400 embeded DI for pulse input flowmeter
I have one flowmeter. rated flow range is 100L/Min, and 1L/Pulse. I need to hook it up to micrologix 1400 embeded DI to read flowrate. Will a...
Replies
5
Views
2,883
ling
L
Back
Top Bottom