dontknowmuch
Member
- Join Date
- Nov 2003
- Posts
- 19
Hi guys I am working on the Batch Mixing process from THELEARNINGPIT.com website and I am stumped.
I can't get it to do this:
Once the tank is empty again, pressing the Start switch will cause the sequence to repeat.
Ensure that the RUN light is energized when the mixer or either pump is running.
The STANDBY light should light and the process should halt when the Stop button is pressed.
The process should restart where it left off if the the Start button is pressed following a Stop.
HERE IS WHAT I HAVE SO FAR. I REALLY NEED SOME HELP
I thank you for your help
I can't get it to do this:
Once the tank is empty again, pressing the Start switch will cause the sequence to repeat.
Ensure that the RUN light is energized when the mixer or either pump is running.
The STANDBY light should light and the process should halt when the Stop button is pressed.
The process should restart where it left off if the the Start button is pressed following a Stop.
HERE IS WHAT I HAVE SO FAR. I REALLY NEED SOME HELP
I thank you for your help