Zombo Member Join Date Nov 2003 Location PA Posts 50 Dec 8, 2003 #1 What bits can I use to accurately display when a S7-414 PLC is in run mode?
jvdcande Member Join Date Apr 2002 Location Menen Posts 2,178 Dec 8, 2003 #2 Any bit! If the PLC doesn't RUN, you can't use any bit.
Zombo Member OP Join Date Nov 2003 Location PA Posts 50 Dec 8, 2003 #3 I know that. However in Allen-Bradley SLC 500's there are several processor status bits you can use. This way when someone is looking at the code it will be more upfront and professional instead of using any bit.
I know that. However in Allen-Bradley SLC 500's there are several processor status bits you can use. This way when someone is looking at the code it will be more upfront and professional instead of using any bit.