AutomaticLeigh
Member
I received a PM asking about the pinout for a Bead Interconnect terminal programming cord. The pinout for a CT10 is as shown below. I believe the the CT1 has a 12-pin connector for Port 2, in which case ignore 13-16.
Bead Serial Port 2 ---- PC 9-pin D
1
2
3
4
5
6 --------------------- 5
7 --------------------- 5
8
9 --------------------- 3
10 --------------------- 5
11 --------------------- 2
12
13
14
15
16
Link 1 and 8 on the Bead
Bead Serial Port 2 ---- PC 9-pin D
1
2
3
4
5
6 --------------------- 5
7 --------------------- 5
8
9 --------------------- 3
10 --------------------- 5
11 --------------------- 2
12
13
14
15
16
Link 1 and 8 on the Bead