showshocka
Member
guys. I have cylindrical run tanks that I'm trying to find the total volume of product (water) it will hold. the number that i come up with will have to be converted to inches, thats what they have this field comunicator setup to read in, example
(0inches=0ma 71inches=20ma) put from the pressure transducers. the amount inches factor will read at the operators panel in lbs. how can i covert it to lbs. myself first to check to see if it's reading correctly. I'm not sure how to convert from "a number" that i come up with. the formula i am using is (2 x 3.14 X Radius x height)
2
when i plug this formula in with numbers the radius of the tank is 73 and height is 79.5. which comes out to 18223. how can i convert this to inches then lbs.?
(0inches=0ma 71inches=20ma) put from the pressure transducers. the amount inches factor will read at the operators panel in lbs. how can i covert it to lbs. myself first to check to see if it's reading correctly. I'm not sure how to convert from "a number" that i come up with. the formula i am using is (2 x 3.14 X Radius x height)
2
when i plug this formula in with numbers the radius of the tank is 73 and height is 79.5. which comes out to 18223. how can i convert this to inches then lbs.?