Port silos plant is working fine except for tracking loaded materials. We decided to install load cells under the load bins. Now, I have some questions to tighten my Project Plan:
1. Is the vendor free of installing any load cell brand?
2. The vendor is going to group each load bin's load cells in one junction box which is abvious. Then connect the jbox output to the PROFIBUS and then to the PROFIBUS-DP module. How many mv needed by the PROFIBUS-DP?
3. Do we need to update the PLC configuration? What do we have to do?
Please notice that I'm SIMATIC S7 begginer. So detailed answers are required.
1. Is the vendor free of installing any load cell brand?
2. The vendor is going to group each load bin's load cells in one junction box which is abvious. Then connect the jbox output to the PROFIBUS and then to the PROFIBUS-DP module. How many mv needed by the PROFIBUS-DP?
3. Do we need to update the PLC configuration? What do we have to do?
Please notice that I'm SIMATIC S7 begginer. So detailed answers are required.