DL405 mb+ to RSView32

nathan.slade

Member
N
Join Date
Mar 2010
Location
n.s.w
Posts
69
hi all.
I would like to know if i can get the analog values out of a Dl405 into my Rsview screen¿ I have a modbus plus pc card that i can use. So my question is can it be done and if so how hard¿ This is a side project and i will be slowly adding to this project as i get better with programing.
Thanks all for your help
 

Similar Topics

L
DL405 upgrade HMI
Hey friends, I have a customer with a Direct Logic 405 D4-440 CPU. It talks to a very antiquated Xycom device for display and a Texas Instrument...
Replies
4
Views
1,936
lesmar96
L
R
DL405 to Micrologix
What is the best method of transferring data from a Directlogic 405 to a Micrologix 1400, All the searches I do looks like Ethernet (Modbus TCP)...
Replies
1
Views
1,969
gclshortt
gclshortt
N
DL405 Reading Analog Inputs - DirectSOFT405
Hi All, I'm brand new to DirectSOFT 5, and fairly new to PLC programming in general, so go easy. I was handed a program with no information on...
Replies
7
Views
2,440
bernie_carlton
bernie_carlton
J
Red Lion HMI with DL405
I'm currently attempting to replace the HMI on an existing system with a Red Lion Graphite or G3 HMI. The PLC on the system is a Siemens Simatic...
Replies
2
Views
3,272
joeboucher
J
T
DL405 Analog Output
I would like to ramp open a 4-20mA valve over a period of 10 minutes. I haven't used a Koyo PLC before. Regards Darren
Replies
4
Views
1,603
milldrone
milldrone
Back
Top Bottom