DL405 Analog Output
- Thread starter Terrep
- Start date
milldrone
Member
Darren,
A correct answer will require some details such as CPU model, module catalog number, and possibly some jumper or dip switch info.
milldrone
Member
Darren,
You will have to forgive me, It's been a while since I have had access to a 405.
I forgot to ask about the I/O addressing of your current system.
My work schedule is very demanding this week so I may not have time to reply quickly.
You will have to forgive me, It's been a while since I have had access to a 405.
I forgot to ask about the I/O addressing of your current system.
My work schedule is very demanding this week so I may not have time to reply quickly.
Similar Topics
Hi All,
I'm brand new to DirectSOFT 5, and fairly new to PLC programming in general, so go easy. I was handed a program with no information on...
Hey friends,
I have a customer with a Direct Logic 405 D4-440 CPU. It talks to a very antiquated Xycom device for display and a Texas Instrument...
What is the best method of transferring data from a Directlogic 405 to a Micrologix 1400, All the searches I do looks like Ethernet (Modbus TCP)...
I'm currently attempting to replace the HMI on an existing system with a Red Lion Graphite or G3 HMI. The PLC on the system is a Siemens Simatic...
hi all.
I would like to know if i can get the analog values out of a Dl405 into my Rsview screen¿ I have a modbus plus pc card that i can use. So...