Micrologix 1100 Forced enable light on
- Thread starter xltek
- Start date
Mickey
Lifetime Supporting Member
That is normal for the Micrologix series controllers.
Other threads about this see link
http://www.plctalk.net/qanda/wherei...ie=UTF-8&q=forces+enable++always+on&sa=Search
Other threads about this see link
http://www.plctalk.net/qanda/wherei...ie=UTF-8&q=forces+enable++always+on&sa=Search
Last edited:
zhoudq
Member
you are ever the forced in the micrologix 1100,then as you are remove the forced signal don't the forced enable changed to the unable,so the lingt on is yellow.
Mickey
Lifetime Supporting Member
More...From Knowledgebase if you have a "TechConnect"
Similar Topics
Hi,
I cannot find the DLCA1764.EXE utilty software for data retrieving. Can someone share the link to download this software. Thanks!
I am currently backing a Micro Logix 1100 and no-one seems to have the file for me to upload from. Is there a way for me to upload the project off...
I am trying to set up a read message in a MicroLogix1100 to read the value of a DINT in a ControlLogix5561. I have successfully set up a message...
Hello,
I have an existing application that has a Powerflex 700 with a 20-COMM-E adapter controlled by a Micrologix 1100 via Ethernet. The setup...
I have a MicroLogix 1100 and it's capable of ac or dc output voltages. What I don't know is how I'm supposed to tell the 1100 to use dc for the...
