1761-CBL-PM2 to RJ12
- Thread starter IrishJerk
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
It sounds like you want to make an adapter from Mini-DIN8 Female to RJ12.
Are you looking for an off-the-shelf adapter ? Do you want to build it yourself ?
It would almost certainly be easier to build a DB9F to RJ12 cable to replace the 1761-CBL-PM02 entirely.
Are you looking for an off-the-shelf adapter ? Do you want to build it yourself ?
It would almost certainly be easier to build a DB9F to RJ12 cable to replace the 1761-CBL-PM02 entirely.
Last edited:
geniusintraining
Lifetime Supporting Member + Moderator
OkiePC
Lifetime Supporting Member
If you don't need the mini-din connector, that is the way to go.
If you need the mini din connector, I suggest keeping the 1761-CBL-PM02 intact and adding an adapter to the DB9 end.
geniusintraining
Lifetime Supporting Member + Moderator
Similar Topics
The manual for the 1761-NET-AIC shows connecting a PC to DH485 network with a 1761-PM-02 cable. Is this done using a DF1 driver set to...
Is there a cable that I can buy that is the equivalent of the
1761-CBL-PM02 plus a null modem and gender changer?
I have some new radio modems...
So, I need a RS485 Modbus slave to do some testing.
Well, since I don't have any RS485 Modbus Slave sitting around but does have a Micrologix...
Good day,
I have a little problem with connected a PLC micro 850 Allen Bradley with a HMI C200. Already connected PLC with ethernet cable in my...
Hi everyone! I am new to the site, I found it while trying to find help getting my driver set up. I am a Mechatronics student, and we are now...
