LOVATO DMK-22 uses modbus communication protocol it is based on RS-485 standerd. I might use 485 to 232 protocol convertor. You plz tell me how I fetch its registers values on WinCC do you have its any register map for winCC
LOVATO DMK-22 uses modbus communication protocol it is based on RS-485 standerd. I might use 485 to 232 protocol convertor. You plz tell me how I fetch its registers values on WinCC do you have its any register map for winCC
Wincc flexible can on some panels "talk" modbus.
Iám not nu shure if you need wincc or wincc flexible solution
In this manual there is a step by step guide
Other thing is by OPC but then you need a comm driver and hardware to the analyzer