Simatic.Net

damain

Member
D
Join Date
Oct 2012
Location
Eastern Cape
Posts
4
Hi there Guys
We have a application that is running VB for visualization and i need to insert some command buttons that will set bits on the Plc.
The Interface we are using is Simatic.net as the opc server between plc and VB. Can any onet tell me where I can Add tags in SImatic.net or how to link say M10.0 with a command button in the VB. Because the VB is looking at OPC item values from the plc.
 

Similar Topics

M
Simatic Net, Excel communication error
I don't know if this is the right place for the subject at least I'll try. The company has one of the oldest computers that is a master Windows...
Replies
5
Views
741
sigmadelta
S
S
SIMATIC NET v13 and D435 Help
I had a system running WinCC v7.0 SP3 and SIMATIC Net V8.1 SP2. The WinCC Runtime project was reading symbolic tags (e.g. D435.HMIVars.Start) from...
Replies
1
Views
1,682
sgtgig
S
N
[Topic (read)] OPC server SImatic Net - Connection between PC Station and S7-1212C
My problem is that I can not approach variables from OPC Scout 10. I can see Data blocks but not variables. I'm using TIA portal v14, SImatic...
Replies
2
Views
2,876
naturephoenix
N
S
Simatic Net 2006 cp5611
Hi I need some help!! Siemens Simatic Net 2006 cp5611 has been discontinued, I have a PC with a dodgy hard drive so looking to do a new install...
Replies
5
Views
1,663
Mad_Poet
M
W
Help : Simens OPC server SIMATIC NET V15
Hello All, I have a system of 2 PLCs Siemens CPU 315 - 2PN/DP (with a program Simatic S7 V5.5) and PC station runs Siemens OPC server Simatic net...
2
Replies
20
Views
7,323
WISAM
W
Back
Top Bottom