rsview32 tag

jkbarik

Member
J
Join Date
Oct 2012
Location
mumbai
Posts
16
dear All , I have created a tag in RSView32. I want to tie it to a bit in binary file (B3)in Rslogix 500. How to do it ?

Thanks
 
Last edited:
How to do it ?
Click to expand...
Open your RSView Tag Database, select the tag, and add or change the PLC address that you want this tag to control or read, as shown by the red arrow below.

RSView Tag to PLC Address.jpg
 
Last edited:

Similar Topics

S
PLC-5 and Mutliple RSView32 PCs - Occasional Wireframe of Tag Data
I have been working on and off with a customer who has a PLC-5/80E that is communicating with five different PCs that are running RSView32 v...
Replies
3
Views
1,729
Ken Roach
Ken Roach
D
RSView32 says tag database cannot be found with copied project folder
Hey guys, A new client I'm working with has an older system, running RSView32 with AB SLCs and Logix500. I want to copy the existing project and...
Replies
8
Views
5,062
defcon.klaxon
D
R
RSView32 tag dump from screens
I was wondering if anyone knew of a way to export a list of tags that are used in each graphic in RSView32.
Replies
4
Views
2,427
Andybr
A
K
Importing slc 5/04 tag database to rsview32
Hi guys, I am new to RSView32, I have been requested to redesign an existing SCADA system whereby a SLC 5/04 PLC communicates with multiple...
Replies
6
Views
2,266
Lancie1
Lancie1
D
tag location lrslogix5000 and rsview32 works
i have an alarm code in RSLogix 5000. I want to check wether the alarm appears on the SCADA. I have no experience with this. I opened rsview then...
Replies
8
Views
2,158
Densam
D
Back
Top Bottom