I have this HMI tied into a plc I am working with. The touch panel has lost it memory and is now giving an error of "no driver installed". Is there a way to fix this, can I restore factory defaults (how), or do I need to load a driver into it?
Ez text ez-220p
- Thread starter echambers
- Start date
icky812
Lifetime Supporting Member
That means the panel has lost the program that was in it. You do have a backup, right?
Similar Topics
Question for EZText 220P experts: Sorry if this is obvious somewhere in the program but I have been pulling my hair trying to use Line 2 PLC...
Hi everyone,
I hope you're all doing well.
I'm currently working on updating an HMI project for the GP2500, and I've encountered a bit of a...
I'm working with a project that contains some routines in ST but mostly in ladder. Am I correct in assuming this 'rung':
DB1001DO._01AV55_OPEN :=...
I have an expression in a structured text routine of a Logix controller that looks more or less like the following:
ResultInteger := Integer1 *...
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4.
The PLC i am using is a compactlogix...
