ceilingwalker
Lifetime Supporting Member
Good day all. I would like to know if the string instructions I use in RSLogix5 are the same as in RSLogix500? Thank you.
String controls and instructions
- Thread starter ceilingwalker
- Start date
Bit_Bucket_07
Member
Yes. They are identical, to the best of my knowledge.
Similar Topics
Hello,
I am using studio 5000 pro and am trying to figure out the structured text. Here's my scenario:
An operator scans a barcode, the barcode...
I am creating a global object in FTView SE 13. I want to have a string read from the PLC and display (in this case the tagname). So lets say...
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
Hello
Inside a FB, I´m trying to transfer a string from a DB to a IN_OUT var that was define as a UDT.
The problem is that i can´t determine the...
As the title says, I'm using CCW with a PV800 (and Micro850). I've made a scheduler in which a user can choose a month, day (1-31), hour (0-23)...