WinCC Afdvanced and Portal Madness

userxyz

Member
U
Join Date
May 2002
Location
any
Posts
2,768
Hi,

I made 2 buttons on a TP1200, connected to a 300 CPU. The 300 CPU is programmed in Simatic. So adress linking, not symbol.

I had a left and a right button.
I first added my left tag with adres DB307.DBX12.1.
And then copy the tag and made my right tag on adres DB307.DBX12.0.

What happened !!! The buttons only affected adres 12.0 !!! Both !!.

I deleted the tags and started with entering the tags starting with adres DB307.DBX12.0 and then DB307.DBX12.1. Now it works fine ???

Tested in simulation mode.

In never seen this in WinCC FLex 2008 ??

Are there still bugs in it ??

I have WinCC Advanced v11 + SP2 + Update 5, the most recent one.

Regards,
G
 

Similar Topics

A
step7 prof. and wincc comfort v17
is there any free trial version available for step7 professional and wincc comfort v17. i searched and downloaded TRIAL Download STEP 7...
Replies
1
Views
94
mk42
M
A
WinCC C-script Raw data operation.
Hello. I have a db which is 1000 INT, and this db is represented in WinCC as a raw data type set of 5x 400 Bytes. This set is read with a script...
Replies
1
Views
100
AdamF
A
A
Javascript Snippet in WinCC Unified
Hello Experts I am working on a project with WinCC Unified v16 PC system and want to create an option on the screen to export logs to the...
Replies
0
Views
89
aamirawan91
A
B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
115
Jkoso
J
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
95
Plantationpark
P
Back
Top Bottom