Do I need a 12v power source?

EdLarry

Member
E
Join Date
Mar 2013
Location
Mogadore
Posts
1
When communicating from a Idec PLC to a pc using the link adaptor, does power need to be applied? There is a place for a 12v power source on the side of the adaptor. It does appear that it may be only needed when using the loader.
 

Similar Topics

D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
11
Views
338
drbitboy
drbitboy
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
164
Steve Bailey
Steve Bailey
E
Need help updating E700 firmware from 2.x to 6.x. Have E700v610.bin file.
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...
Replies
1
Views
70
parky
P
dalporto
Logix - Structured Text - Need a hand
Good evening. I display the step number of a SFC on a display. Sometimes, on a trip, it goes quickly through many steps and I need to prove to...
Replies
1
Views
129
dalporto
dalporto
dalporto
Wonderware integrators / programmers - Need opinions
Good morning all. I'm working on a rehab where they had a standalone InTouch 2014 HMI that they called a SCADA, but it's really basic stuff. The...
Replies
4
Views
182
dalporto
dalporto
Back
Top Bottom