string value HMI(GT-schneider electric) to ET200s Siemens PLC

Ashish Thakur

Member
A
Join Date
Dec 2012
Location
Ashia
Posts
16
Hllo to all,
im working on project, bar code scanner read the string value from the product then move to HMI (GT-schneider electric) how to move string value from HMI to PLC(ET200S) siemens.
thanx in advanced...:unsure:
 

Similar Topics

M
A&B Micro820 ModbusRTU value to String
Hello, I am using an A&B Micro820 togehter with ccw. Reading a device via Modbus RTU. This goes all OK. Now I am reading a Modbus register...
Replies
2
Views
1,277
drbitboy
drbitboy
G
Horner PLC and Cscape ascii string to value help
I have a Horner PLC that is reading Ascii string from a device. When the device responds, it responds with the hex value in Ascii. I need to...
Replies
8
Views
2,381
drbitboy
drbitboy
M
Twincat3 value of variable pointed by string
Hi, In Twincat3 x64 is it possible to get value of variable of which name is read from a string variable? VAR VAL1 :REAL:=555...
Replies
2
Views
1,216
mrburns
M
A
Writing a string Value in CITECT
How can i write aHint or dialog Text box when runtime manger already running .
Replies
0
Views
1,645
ahmed007
A
L
HEX string value > 2^31 issue.
Hi Guys, I have a problem with reading the following HEX string into a CompactLogix PLC. The HEX string is "D852268A" which if converted to a...
2
Replies
16
Views
4,635
Latzi
L
Back
Top Bottom