Hi Everybody,
It is just a simple program but i still can't do it.
Pls look into my attachment picture.
I can key in the Preset value of counter 1 from HMI.
Then, i want to subtract 10 from key in value.
I want to use this Subtract_Value as a Preset value of Counter3.
My require application is that when i key in 100 from HMI and when counting value reach to 90 , then i want to trigger output 1.
Can anyone pls advice me how to program for this application.
THank in advance,
It is just a simple program but i still can't do it.
Pls look into my attachment picture.
I can key in the Preset value of counter 1 from HMI.
Then, i want to subtract 10 from key in value.
I want to use this Subtract_Value as a Preset value of Counter3.
My require application is that when i key in 100 from HMI and when counting value reach to 90 , then i want to trigger output 1.
Can anyone pls advice me how to program for this application.
THank in advance,