busarider29
Lifetime Supporting Member
This is my first post but I have a couple questions. First, the PLC that I'm using is a SLC 5/05 with RSLogix 500 V.9.00. What is the best and most efficient way to count cycles when dealing with cycle counts in the 500K range? I just want to know if there is an easier and more "cleaner" way to do it than what I'm doing. Also, during a power loss (we get frequent facility power losses), can I retain that cycle count in the PLC, so that we can start up again and begin cycle counting where we left off before the power loss?
All and any help or advice is much appreciated.
- Don
All and any help or advice is much appreciated.
- Don