Ety110_premium plc_telemecanique

Greetings
What commands or functions for reading or writing TELEMECANIQUE PLC PREMIUM WITH ETY110ws card and use the Ethernet protocol should be used?
If the project is a set of data (digital and analog) from Siemens PLC WITH CP343-1 TO TELEMECANIQUE PLC PREMIUM WITH ETY110ws SENT.
Communication protocol is MODBUS TCP IP.
1-Do you need to order a specific property or function is TELEMECANIQUE PLC PREMIUM?
2-You just have to be set to ETY110 MODULE?
3-Is it enough to just use the FB100 and FB101 at Siemens PLC?
Thanks

Hello,

Here is link: http://www.schneider-electric.cn/downloads//85257689000007EE/All/85648286CDC5961F852576B2006A5534/$File/49-Unity-EN.pdf

You have everything explained in this manual. You will have to use Modbus TCP/IP.
On www.modbus.org, you have everything explained regarding modbus. There is Modbus Messaging on Tcp/IP Implementation guide (link: http://www.modbus.org/docs/Modbus_Messaging_Implementation_Guide_V1_0b.pdf), which will help you.

Best regards.