Ethernet communication between CP1L

bangob

Member
bangob
Join Date
Jul 2004
Location
Zalaegerszeg
Posts
28
Hi Guys!

I would like to communicate between two Omron CP1L plcs via ethernet. What is your suggestion about the simplest ladder program to read and write the other plc registers?
Thanks in advance!
 

Similar Topics

C
Ethernet communication problems between CJ2M and NB5Q
unexpected problem happening when connecting said panel to a CJ2M-CPU35 via Ethernet (was replacement of broken NT21 via NT Link). The machine...
Replies
0
Views
666
CX_Luigi
C
F
Ethernet communication between CJ2M and Lenze SMV Drive
Hi All, I am having issues communicating between an Omron CJ2M PLC and a Lenze SMV Drive (with Ethernet Module). I have set up Network...
Replies
1
Views
1,162
forqnc
F
H
Ethernet/ip communication between ML1400 and Productivity 1000
Hello, I am trying to use micrologix 1400 Ver.A as adapter and a Productivity P1-540 as scanner, only Ethernet/IP is supported by ML1400 Ver.A...
Replies
2
Views
1,875
halosome
H
A
ethernet Communication between Delta HMI and Siemens PLC S7-300
hello dear we have a problem with communicate with delta dop hmi and siemens s7-300 cpu . we use ISO ON TCP connection and AG-SEND and AG-RECV...
Replies
2
Views
3,512
boneless
boneless
A
Communication between PLC and PC through Ethernet module
Hi All, I have a machine having Mitsubishi Q series (Q02) CPU. There is a dedicated software for machine which operate through PC (window based)...
Replies
4
Views
1,999
Asad Abbas
A
Back
Top Bottom