Controlnet question
- Thread starter epicnote
- Start date
Similar Topics
So we have an older system which runs on controlnet. It’s a logix 5000 based system with about 8 powerflex 40P drives. One of them I have to...
I'm specking out requirements/costs for a new machine to be built later this year. I plan on using Controllogix for the PLC control. My question...
I was wondering if there is a way to get the amperage from a powerflex 700 over controlnet to an hmi or even wonderware? Any suggestions thanks.
We have several plc's networked together by controlnet and to better understand it we are building a training module.The Module consists of two...
Greetings,
I've done a couple of smalll ControlNet projects, so I am somewhat familiar with the technology.
I'm looking at designing a couple...
