geoplc
Member
What are the options for communicating with PIC devices once I switch to Windows 7/8?
Windows 7/8 and PIC devices
- Thread starter geoplc
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
If you are using RSLinx then you will need a newer version, the procedure for a 64bit and a 32bit are not the same, this is a YouTube video on how to setup RSLinx for 64bit and 32bit http://www.youtube.com/watch?v=uWgu1jdAPkE
For a cable you will need a 1747-UIC, we sell a after market one
http://www.plccable.com/allen-bradley-1747-uic-usb-to-dh485-usb-version-1747-pic/
This is a USB version of the PIC, you can also buy one from your local AB dealer
For a cable you will need a 1747-UIC, we sell a after market one
http://www.plccable.com/allen-bradley-1747-uic-usb-to-dh485-usb-version-1747-pic/
This is a USB version of the PIC, you can also buy one from your local AB dealer
Similar Topics
I have windows XP on my laptop and I am going to try to connect to a micro 1000 that was programmed with a pic driver. I have a 1747-uic cable...
hello, how do i get the 1747 PIC to work in RSlinx (2.42) using Windows XP (Home)?
Will the 1747-pic driver work with windows xp?
We have a cpu fault on a 1747-l40a and I need to upload the program. When I configure the pic it...
Does anyone know if there is some unrepairable conflict problem using a PIC box (1747-PIC) with Windows XP? I can't communicate at all using the...
I am having windows XP on laptop. it has a serial port. I am using RSLinx 2.30. I am not able to see the PIC driver in driver list during...