pin out for laptop to got1055

Similar Topics

A
3-pin RS232 to RS485
Hello: I have to connect a RS232 Modbus RTU slave that only has Tx, Rx and GND signals to a Modbus RTU master. However, all RS232 to RS485...
Replies
3
Views
234
AlfredoQuintero
A
D
Ramping PWM pin on Micro 820
Hi All, I came up with this for ramping the PWM pin on the micro 820. I'm new to ladder logic so I am not sure if this will even work? Once...
Replies
6
Views
350
drbitboy
drbitboy
J
MELSEC A RS422 (25pin) <> iQR C24 Serial RS232 (9pin) - Simple PLC Communication
MELSEC A RS422 (25pin) <> iQR C24 Serial RS232 (9pin) - Simple PLC Communication Communication from a MELSEC-A Series CPU (RS-422 – DB 25 Pin)...
Replies
4
Views
1,042
jenas6423
J
xzen
M12 Sensor connector FE-pin
M12 sensor plugs are widely used. I'm about making my own CAD symbols for sensor connections, and I'm not sure about including pin #5, which is...
Replies
6
Views
1,509
Jim3846
J
M
TIA Portal : FC pin for inout variable
In my FC I use an inout variable for the memory of a Set/reset. When i call the FC i have the pin at the entry side of the block while i would...
Replies
4
Views
1,932
goghie
G
Back
Top Bottom