Monitoring Panelview600 Seconds

ctg_00

Member
C
Join Date
Aug 2011
Location
new jersey
Posts
13
Does anyone know how to have the Panelview 600 write its internal time in seconds to a register in a PLC5/40 I want to create a monitor in the PLC5 to see if the RIO comms drops out. Is this the best way to do that? I have the time in seconds running as a display on one of the screens in the PV using Panelbuilder32

Thanks in advance.

ctg
 

Similar Topics

M
DL205-1 CPU Monitoring
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
65
bernie_carlton
bernie_carlton
U
A tonnage module trend monitoring
Our punch press has a SLC500 with HELM weight module (HM-604-WM) for tonnage monitoring. The operator enters the weight range on the HMI, which is...
Replies
9
Views
203
MikeyN
MikeyN
Z
Connecting and Monitoring a DLR on a Remote Rack
Hello, I have been trying to figure out how to connect to and monitor a DLR that is on a remote rack from my PLC. The local has a 1756-L81E and...
Replies
0
Views
118
Zalewski14
Z
J
Delta Web Monitoring
Good day, we have 15 analog inputs, we need to log the data in excel and monitor these values through web browser. We're planning to go with Delta...
Replies
1
Views
123
Plantationpark
P
O
PLC Comms Monitoring
I have several plc’s that I’d like to monitor Into our SCADA when the comms break or plc faults. These are (SLC-505 & Compact Logic PLC’s) I...
Replies
6
Views
745
I_Automation
I_Automation
Back
Top Bottom