replace new AOP30

mehdir

Member
M
Join Date
Sep 2012
Location
naien
Posts
11
Hi
i want to replace new AOP30 (6SL3055-0AA00-4CA5). the old model is 6SL3055-0AA00-4CA0. when I replace it and power on, the AOP30 can,t connect to database in uc320. How do I Solve this problem and configure AOP30?
 

Similar Topics

A
Replace Backhoff CP6205
We have a Beckhoff CP6201 PC and an EK1100 module communicating with it via EtherCAT in one of our machines. Due to problems with the PC, I want...
Replies
0
Views
81
Angel_1994
A
T
Panelview 550 (with DH+) replace or migrate
Panelview 2711-K5A8. Customer has 6 of these in service connected to SLC 504’s. One has a bad backlight and I need a solution to replace it...
Replies
11
Views
2,277
ThomasGruetter
T
E
Replace relay with sinking output (non)
I’ve got some devices that are triggered by shorting pins to common. There is 24 volts on each pin and right now I am using a relay output card...
Replies
8
Views
2,606
I_Automation
I_Automation
H
Replace SIEMENS CPU S400 by noncompatible CPU
I can't replace cpu S400 416-3XR05-0AB0 BY 416-3ER05-0AB0 in PCS7 Project when using replace object to keep the original configuration in the...
Replies
4
Views
1,522
HRagab
H
A
How to replace RSlogix 500 DCD bit with studio 5000 ladder diagram
How can I achieve the same functionality in Studio 5000? Image 001.png for the old RSLogix500 program Image 002.png for conversion to Studio...
Replies
6
Views
2,562
Taguch84
T
Back
Top Bottom