analogue input to plc
- Thread starter hala-whab
- Start date
rQx
Lifetime Supporting Member
How to read it?
First wire it to the s7-1200 CPU or EXP, then you get the value in TIA portal and can manipulate it.
First wire it to the s7-1200 CPU or EXP, then you get the value in TIA portal and can manipulate it.
nonuke
Member
- Join Date
- Sep 2005
- Posts
- 840
In the link below, you can find many applications for the S7-1200 and some have analog input examples.
https://support.industry.siemens.com/cs/#document/35923253?lc=en-WW
Sensor to read tank level: Pressure sensor, ultrasonic sensor, radar sensor etc.
https://support.industry.siemens.com/cs/#document/35923253?lc=en-WW
Sensor to read tank level: Pressure sensor, ultrasonic sensor, radar sensor etc.
Similar Topics
This particular problem is doing my head in...
In our system we have a minisonic flowmeter. One of these.
It outputs 4-20mA and is an input into...
Hi all, I need some advice on an Analogue Input on a Phoenix contact PLC inline control ILC200IB. The machine it as attached to is a Jensen...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Hello guys
I am just wondering do I need to set up each channel configuration, including enabling the channel , ranging … if I have already...
Hi,
I have a device which is giving out a 4 -20mA signal but the ADC's on the PLC channel do not match.
The supplier is saying the channel needs...