Hunter1978
Member
Please Help me! Is the only way possible for reseting a fast counter or HSC the one of the physical inputs or there´s a way of doing it internally? I tried to write "0" in the memory assigned to the counter but it doesn´t work...
Reseting of fast counters in TIA Portal
- Thread starter Hunter1978
- Start date
BryanG
Member
Use CTRL_HSC.
Hunter1978
Member
OP
Thanks!!!!
Thank you so much Bryan! I solved my problem thanks to you.
Thank you so much Bryan! I solved my problem thanks to you.
Similar Topics
I will really appreciate if you could help me with this Codesys program in Ladder logic: I am working on a project where I am using TOF function...
Good day all. May your holidays be merry. When programming using RSLogix (the software used to program Allen Bradley PLC's), how can I have it so...
Hello
i have a problem for controlling of Altivar32 from Schneider.
it always says "CANOpen error".
"Reset" signal is not helping.
i am using...
I am using an Allen Bradley Micro810 to count cycles on a machine. After 100 cycles a warning light will come on to have maintenance performed...
i want to factory reset my micrologix 1200 what are the option
