Upload WinCC Program

Damain06

Member
D
Join Date
May 2015
Location
Uitenhage
Posts
14
Hi there guys I wanted to know if it is possible to upload a WinCC program from a HMI if you lost the source code. Is it possible just to connect and upload as you would do with a plc program?
 
If you just wanted to create a backup of the running app you could use pro-save.
You can drop the project to an identical replacement.
As far as opening the project/Development though, the answer is no. you'll need the source code.
 

Similar Topics

I
How to Upload program from WinCC to PC/Laptop
Hi everyone.. Anybody know how to upload program from WinCC to PLC/Laptop, I am using Simatic Wincc Flexible 2008 SP3 software. I have tried by...
Replies
6
Views
4,877
uptown47
U
K
Siemens WinCC Flexible screen upload
I have WinCC2008 and a TP177B screen . I need to upload the program from a screen on site and download the program into a new screen. Can...
Replies
6
Views
5,849
userxyz
U
R
WinCC upload problem
Hi All, I got a new TP 177B MSTN. The problem is I cannot download my project to the HMI. Im using a siemens PC adapter USB for downloading my...
Replies
5
Views
4,433
recycled_mind
R
J
90/30 CPU Upload
I have a 90/30 CPU331. I am trying to upload the program out of the CPU and keep getting an error uploading the logic. Error 8262: Error...
Replies
6
Views
113
James_TC
J
C
Studio 5000 Upload Failure
I am connecting to a remote device. When attempting to upload I receive an error that states: Error: Auto_Functions: The Import was aborted due...
Replies
3
Views
190
robertmee
R
Back
Top Bottom