Hi,
thanks for the supports to my programming needs.
i now have some questions
1. how we are configuring an analog input module (1769-IF8) to a 1796-L24 PLC to read 4-20ma. how would be the scaling? it is also needed to display in the PVP 400 PLC (keytype display).
Inputs:
am using thermocople omega m12jss, level sensor -Flowlline DL14(xx), TT - Automation direct FC-T1.
all readings shall be displayed on HMI.
there are three tanks, need to measure the temp and level. one tank has two thermocouple and the average of this could be read in PLC. other tanks have only one thermocouple. the output of thermo couple (4) and level sensor (2nos) given to PLC through analog input module 1769IF8. taken the outputs from plc and given to hmi for display.
could anyone help me out?
Thanks,
Roni.
thanks for the supports to my programming needs.
i now have some questions
1. how we are configuring an analog input module (1769-IF8) to a 1796-L24 PLC to read 4-20ma. how would be the scaling? it is also needed to display in the PVP 400 PLC (keytype display).
Inputs:
am using thermocople omega m12jss, level sensor -Flowlline DL14(xx), TT - Automation direct FC-T1.
all readings shall be displayed on HMI.
there are three tanks, need to measure the temp and level. one tank has two thermocouple and the average of this could be read in PLC. other tanks have only one thermocouple. the output of thermo couple (4) and level sensor (2nos) given to PLC through analog input module 1769IF8. taken the outputs from plc and given to hmi for display.
could anyone help me out?
Thanks,
Roni.