I rarely post a thread with a request but I have searched many days, with very little results, for manuals or any info on the old TI-128 plc and the TI-103 programmer for it. Any info or manuals for these devices would be a big help. I am just using them to expand my knowledge. I have many other types of plcs available but I want to learn more about these particular devices. Thanks.
Old TI 128 PLC and TI 103 programmer
- Thread starter jrwb4gbm
- Start date
Contact Tek Supply. I see that they have for sale videos on how to use the TI-103 Programmer. Also many other parts and complete units for the old Texas Instruments PLCs.
http://www.tek-supply.com/TI.html
http://www.tek-supply.com/TI.html
The TI-103 Programmer video was down near the bottom of the list. It seems to have been removed.
I still see 2 or 3 TI-128 PLCs on the list, and two TI-109 Programmers. If they have the manuals for the obsolete equipment, they might be willing to sell you a copy.
I still see 2 or 3 TI-128 PLCs on the list, and two TI-109 Programmers. If they have the manuals for the obsolete equipment, they might be willing to sell you a copy.
Similar Topics
This is admittedly a pretty obscure problem, but maybe someone else has run into it, or at least something similar. For reasons I won't get into...
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Hey all,
I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Hi,
One of my customers has an old fabric tensile testing machine. The IC # AD7501KN of its controller has malfunctioned. This IC is related to...