Prevent Dry Flow

gcooper

Member
G
Join Date
Jun 2014
Location
test
Posts
2
My problem is when the flow switch opens I want the operator to manually reset the switch and give him time to see why the flow stopped.

Thanks in advance

FlowVerifications.jpg
 
Needed a Dummy Bit (Solution)

Fixed it ... just had to figure a way to keep the Timer active by using a dummy bit

FlowVerificationsFix.jpg
 

Similar Topics

S
Prevent dust collection inside the enclosure
We am planning to build an electrical enclosure on the manufacturing line. The only concern is to prevent dust from getting collected inside the...
Replies
3
Views
2,078
NetNathan
N
N
Prevent renaming of In-sight files to avoid Native mode command issues
Hi All, I am using a Micrologix 1100 to load various Jobs on a cognex camera. The way it works is that I send a command to load the file and I...
Replies
1
Views
1,540
the_msp
the_msp
K
Prevent bad value of analog input in Controllogix PLC
We have L72 controller of Rockwell make with 4 nos. analog inputs from pressure transmitters. Due to break in cable connection OR transmitter...
Replies
7
Views
2,087
RonJohn
RonJohn
B
How to prevent people leaving programs open?
Hello, We have 5 floating licenses for Studio 5000. Despite training people to disconnect from the PLC and close the software, we still have...
Replies
6
Views
2,705
Epy
E
B
5/05 memory module - lost edits on power outage, how do I prevent this?
Hello, A few years back I was having a SLC 5/05 hard faulting, losing program, and requiring a download to get going again. The processor was...
Replies
7
Views
2,911
Ken Roach
Ken Roach
Back
Top Bottom