I am sending Omron Text over devicenet to an AB GuardLogix Processor. I am having a difficult time converting the string to readable data. I am sending total of 8 words from the Omron and am unable to convert it to the same String characters in the AB processor. I can use the SWPB function in the AB to convert atleast 4 characters to a string at a time, but cannot combine them with any more characters to get a combined logical string.
For Example: if I send 8 words from omron that represent these characters, 27 0B RM 2 (which is 4 words), Then I get 809644599 in the 1st word over devicenet and 838881869 as the 2nd word, when the AB is setup as a DINT.
When using the DT0S function to convert a DINT to a string, I still wind up with numbers, vs. alphabetic characters.
Any help would be appreciated.
For Example: if I send 8 words from omron that represent these characters, 27 0B RM 2 (which is 4 words), Then I get 809644599 in the 1st word over devicenet and 838881869 as the 2nd word, when the AB is setup as a DINT.
When using the DT0S function to convert a DINT to a string, I still wind up with numbers, vs. alphabetic characters.
Any help would be appreciated.