Red Lion Crimson ShowModal() cmd

Get ready for some seemingly easy questions!

I have a setpoint that pops up a data entry for temperature. I have also instituted a auto ramp limit that lets it only add degrees based on time at setpoint.

My G310 I would like to make a popup appear when the setpoint button/indicator box is pressed, to allow the operator to say yes or no to enabling the auto ramp program in the PLC.
I know the reference manual says the popup will be on top of everything, using the ShowNested(ShowPopUp()) layout.

Is this to method a complex tag or a program?? Any help with examples would be appreciated. I have the reference manual, but am stuck.

http://files.redlion.net/filedepot_download/1288/4205

This will show like a page. I would treat it like any other page.

Hope this helps,
Garry
http://www.accautomation.ca