HW configuration check

Moustafa Elsherief

Member
Moustafa Elsherief
Join Date
May 2007
Location
giza
Posts
154
Hello guys

Now Iam working at updating chemical fillng machine with 2/AO 1/AI 35/DO 39/DI and incremntal encoder and 6 digital O/P flow meters "Dossimass E&H"

I will choose this confguration

PS 307-10A
CPU 312
FM310-2 .....8 channel
6ES7322-1BP50-0AA0........64 bit DO card
6ES7321-1BP00-0AA0........64 bit DI card

Please any one have any advice or it is good enough.
 

Similar Topics

K
Emulator configuration for rs control logix 5000 to check errors in the program
hi i have completed my program i want to download and run it with emulator can any one guide me how to check with emulator.
Replies
2
Views
3,866
kbn_120184
K
M
unable to verify settings due to packet timeout! Check all cables and configuration a
I am trying to configure RS Linx to talk to a Micrologix 1200. The micrologix was connected to a panelview so I took out its RS-232 cable and...
Replies
1
Views
6,434
Ken Roach
Ken Roach
O
Micromotion 1700 Configuration
I've been fighting with a Micromotion 1700. Can't get into the configuration area. It's as if the optical sensors are disabled or locked out...
Replies
1
Views
72
tdoa
T
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
80
dmroeder
dmroeder
A
Kinetik 300 -2097-V33PR3 Master and Slave Configuration
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Replies
0
Views
94
Ansonkiek
A
Back
Top Bottom