Logix5000
- Thread starter Hojland
- Start date
RoTaTech
Member
Open RSLogix 5000. On the left side should be a column with the heading Controller Organizer. Find the input or output card and points under Controller-Controller Tags. Highlight the card or point you are seeking, and press CTRL-E, or right click and choose Cross Reference. That will display all the routines and rungs where the card's points are used.
Last edited:
Similar Topics
Hi!
So my problem is a little funky, I had Studio 5000 v 24 and 30 installed, but forgot to install RSLogix (which I cannot go without). Is there...
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
I'm a Siemens person, and this is one of my first AB programs.
The customer wants everything programmed in Ladder.
I have a lot of data (3...
Good day everyone. if you have a logic for 3 pumps (lead/lag/off), would you please email it to me? I really appreciate it!
Maybe this is just not possible, or maybe I am doing something wrong.
Background;
I have a data array of over 1500 products. For sorting I...