Quantum CHS110 hot Standby test

karivelm

Member
Join Date
Nov 2006
Location
Quebec
Posts
66
Hello,

I have a bench test as shown in the picture but I do not have the RIO part. I am looking to place the system in run mode but I get the following message:

Option d'entrée et sorties décentralisé defectueux? Which means faulty decentralised input and ouput option ..

I cannot but my Quantums in run mode... Any suggestions.

Is there a way to make this work without the RIO part?

Network for test.png
 
Hello,

I have a bench test as shown in the picture but I do not have the RIO part. I am looking to place the system in run mode but I get the following message:

Option d'entrée et sorties décentralisé defectueux? Which means faulty decentralised input and ouput option ..

I cannot but my Quantums in run mode... Any suggestions.

Is there a way to make this work without the RIO part?

I don't know that part number, is that an older processor ?
 

Similar Topics

Hello All, Was hoping I could get a little help with Modicon ladder logic. This is the first time I have seen Modicon logic and currently trying...
Replies
6
Views
266
Hi There, I have a Modicon Quantum PLC, there is a alarm on display "noConfig" its happened after power failure, I have gone through manuals...
Replies
3
Views
652
Hey guys. Mostly new to this stuff so I apologize if I'm not following proper format. I have 3 working CPU133 /3s. There is a desktop with a...
Replies
2
Views
894
When i read the specification of 140CPU43412A i observe that as remembered in specification 1. Local i/o : Maximum i/p and o/p words are 64 in...
Replies
0
Views
496
Main rack contained power supply 140cps52400 and 140cpu43412A and RIO HEAD 140CRP93100 in addition to another I/o cards . Another remote rack...
Replies
8
Views
1,863
Back
Top Bottom