Ljohansen Member L Join Date May 2015 Location Odense Posts 6 Nov 23, 2015 #1 Hey Guys I am in the process of converting our PLC program from the old S7 300 Profibus to ET200 Profinet. When I compile I get the attached error. Could you look at it? Thanks
Hey Guys I am in the process of converting our PLC program from the old S7 300 Profibus to ET200 Profinet. When I compile I get the attached error. Could you look at it? Thanks
bkottaras Member B Join Date Oct 2005 Location Chicago Posts 1,798 Nov 23, 2015 #2 Under "connection" for your HMI tags, point the tags to the new "name" of your connection. Probably the old tags were looking for a "S7300" but with the conversion the new connection may be "PLC_1" or something else.
Under "connection" for your HMI tags, point the tags to the new "name" of your connection. Probably the old tags were looking for a "S7300" but with the conversion the new connection may be "PLC_1" or something else.