Kataeb
Member
Kindly, we are running the below cnc machine, after finishing a control and servodrives upgrade.
But, we are having some problems to stop the tool magazine at the exact position for tool change.
It is rotated by an hydraulic motor, which is controlled by hydraulic valves, making it very difficult to control the stoppage position.
Have you seen any cnc tool change similar to this one?
Any hydraulic recommendations?
MAZAK AJV-18N CNC Vertical Machining Center
http://www.gaec.com/catalog/machines/k13587.htm
Yamazaki AJV18N
https://www.youtube.com/results?search_query=yamazaki+AJV18N
(2nd 3rd ... videos)
index motor
EIS 160-2PC-2AH0-LL
valve
SL-G01-A3X-GRT-C1-9320B
valve
SL-G01-C5-GR-C1-9320B
But, we are having some problems to stop the tool magazine at the exact position for tool change.
It is rotated by an hydraulic motor, which is controlled by hydraulic valves, making it very difficult to control the stoppage position.
Have you seen any cnc tool change similar to this one?
Any hydraulic recommendations?
MAZAK AJV-18N CNC Vertical Machining Center
http://www.gaec.com/catalog/machines/k13587.htm
Yamazaki AJV18N
https://www.youtube.com/results?search_query=yamazaki+AJV18N
(2nd 3rd ... videos)
index motor
EIS 160-2PC-2AH0-LL
valve
SL-G01-A3X-GRT-C1-9320B
valve
SL-G01-C5-GR-C1-9320B
Last edited: