Hello everyone! I'm Andrea, 27. I've just started working with PLC, but I know all the theory behind it from school.
First thing, I didn't find a "Welcome section" and so I couldn't introduce myself, sorry for that.
But let's begin with my problem. I have to test 30 different channels, just check if all of them are under 1/4 Ohm of resistance. I have to do it with a PLC, most probably a S7-1200. I was wondering if it's possible to directly connect via software two different outputs or an input and an output. When I say "connect" I mean phisically because otherwise the Fluke multimeter can't detect the correct resistance.
Of course, since I'm a beginner if you are open to other ideas, I'm all ears!
Thanks everybody!
First thing, I didn't find a "Welcome section" and so I couldn't introduce myself, sorry for that.
But let's begin with my problem. I have to test 30 different channels, just check if all of them are under 1/4 Ohm of resistance. I have to do it with a PLC, most probably a S7-1200. I was wondering if it's possible to directly connect via software two different outputs or an input and an output. When I say "connect" I mean phisically because otherwise the Fluke multimeter can't detect the correct resistance.
Of course, since I'm a beginner if you are open to other ideas, I'm all ears!
Thanks everybody!