I'm using an Omron NT31C HMI and a C200HG Omron PLC. I tried downloading data from the PC to the HMI (using Port A) and it was successful. I can see the screen when I go to screen display. But when I exit it and come out to the main screen of the HMI it says 'System Initializing'. My addressing on the NT support tool under PT control area is D00100 and PT notify area is D00110...I'm really not sure how addressing works in Omron as I'm used to working with AB.
AFTER downloading data to the HMI, this is how I connected everything: HMI serial port B to the PLC using an RS-232C cable and PLC to the PC using an RS-232C cable.
Btw..I'm on my last year at college and this is for my final project..i just cant get it to work :S
Anyone who's willing to help, I'd really appreciate it!
Thanks!
AFTER downloading data to the HMI, this is how I connected everything: HMI serial port B to the PLC using an RS-232C cable and PLC to the PC using an RS-232C cable.
Btw..I'm on my last year at college and this is for my final project..i just cant get it to work :S
Anyone who's willing to help, I'd really appreciate it!
Thanks!